What are the Kpower treadmill,Kpower treadmill installation steps first stand up the treadmill column, fix one side of the column with 8 x 50 screws, install one side, and then install the other side. After the side of the post is secured, secure the back of the post with two 8 x 16 screws.

The hole of the handrail is aligned with the hole of the connecting piece of the column, and the half of the handrail is fixed with an 8 times 50 screw, and the two or three wires are fixed, and do not screw too tightly. Once fixed, then install the other side of the armrest screw, and then put on the black protective cover.

Install the brackets between the posts and attach them to each side with four 7 x 16 screws.

Fixed dial armrest. Connect with two 7 x 40 screws, then install the white protective cover on the armrest.

Install the treadmill host and massager bracket. Note that when installing the massager bracket, be sure to add plastic pads! To reduce the vibration of the massager when working. Use 7 x 65 screws to secure the massager to the U-shaped armrest in front of the treadmill. Do not tighten the screws too tightly. Then place the green sponge sticks on the massager bracket in turn, and finally place the dumbbells on the bracket in the corresponding position.

Unscrew the 3 screws on the back of the massager, then place the massager on the massager bracket, then unscrew the screws, and finally install the massage belt.

Install a safety lock on the dial. Do not underestimate this link, the safety lock is the second switch of the treadmill! If you want to listen to music while running, you also need to connect USB ports and MP3 ports.